VIBRATION RESISTANT DIGITAL INCLINOMETER
PORT POWERED USB EZ-TILT-5000-rev3-05VIB, advanced programmable dual/single axis LINEAR Digital output tilt module, built around a customized state of the art CMOS Microprocessor. The module is equipped with full range linearity correction routine for each axis of tilt.
The standard module uses two sensor combination of SX-005D-VIB single axis vibration resistant inclination sensors and provides an economical and reliable tilt sensing solution for applications requiring superior Nulling capabilities with concurrent excellent Mid-Wide range LINEARITY, resolution, repeatability and symmetry.
Rugged hermetic construction and MIL-SPEC temperature range make these sensors perfectly suitable for numerous high precision OEM, military, medical, optical, automotive, range finder, alignment, automation, robotics and construction angle measurement applications.
Exceptionally stable and consistent performance in temperature variable environments and it’s LOW cost make EZ-TILT-5000-rev3-05VIB the perfect choice for high accuracy leveling applications. In addition to digital filtering the electrolyte may be modified to filter out errors due to shock & vibration.
| Specification | EZ-TILT-5000-rev3-05-VIB | Comments/Units | |
|---|---|---|---|
| Range | -5 to +5 | arcdeg linear | |
| Resolution | 12 | bit, RS232, 8,1,n,no flow. | |
| Repeatability | 0.02 | arcdeg typical | |
| Linearity | <0.2% @ 5° | CCW & CW | |
| Response time | <60 msec | msec * # | |
| Time constant | <250 msec | msec ** # | |
| Tot. settling time | <1000 msec | msec *** # | |
| Temperature | -30 to +85 | deg C operational | |
| Temperature | -55 to +125 | deg C storage | |
| Sensor Construction | ceramic | Consistently molded VIB type |
| Power | 7-15Vdc | Vdc | |
| Optional Power | USB | port powered Vdc | |
| RS232, RS422, RS485 | 115Kbps-1200,8.1,N | 19.2Kbs default |
* Elapsed time until the sensor reacts to a tilt disturbance.
** Elapsed time from the end of disturbance until the sensor is within 90% of its final output.
*** Elapsed time from the end of disturbance until the sensor is at STEADY STATE output.
# Based on standard non-modified electrolyte.
# Viscosity of the electrolyte may be modified to filter out vibration.
ALL DATA OBTAINED WITH EZ-TILT-5000-Rev3 ANGLE CONVERSION MODULE
Specifications and color of sensors may change without notice.