2525 Brunswick Ave, Suite 205
Linden,  NJ  07036,  USA
Tel:   908-474-9595
Fax: 908-474-9090
sales@aositilt.com

Compasses, Solid State Inclinometers, Directional Probes, Electrolytic Tilt Sensors

EZ-LEVEL-PRO-CNC

mini_EZ-LEVEL-PRO_front_image_for_manual__RED.jpgLEVEL-PRO-CNC is an advanced dual axis inclinometer system equipped with a remote tilt sensing probe that allows continuous monitoring of PITCH and ROLL angles on a remote high resolution color display handheld controller.

Menu driven system lets users change and select various display functions while being located remotely from the actual tilting surface.

The system assists installers of large machinery or CNC cells to make corner height adjustments during installation and setup without returning to the sensor location and verify its orientation.

All this information is available in real time on a handheld monitor that the installer carries with him while making adjustment.

The remote probe has horizontal reference surface and provides users with an ability to secure the probe on flat horizontal work table with specially designed universal T-holder.

Upon special requests the probe can be produced from Titanium or other exotic material

EZ-LEVEL-PRO-CNC has integrated USB port for direct computer interfacing.

Test data can be logged in real time via any terminal program and used for further analysis or record keeping.

EZ-LEVEL-PRO-CNC is available in following tilt range/resolution configurations:

EZ-LEVEL-PRO-70          +-70 arcdeg range                   +-0.080 NULL null accuracy *

EZ-LEVEL-PRO-45          +-45 arcdeg range                   +-0.055 NULL null accuracy *

EZ-LEVEL-PRO-30          +-30 arcdeg range                   +-0.035 NULL null accuracy *

EZ-LEVEL-PRO-15          +-15 arcdeg range                   +-0.025 NULL null accuracy *

EZ-LEVEL-PRO-10          +-10 arcdeg range                   +-0.020 NULL null accuracy *

EZ-LEVEL-PRO-04          +-  4 arcdeg range                   +-0.005 NULL null accuracy

EZ-LEVEL-PRO-01          +-  1 arcdeg range                   +-0.001 NULL null accuracy

“ * “  special request

Standard configuration of the EZ-LEVEL-PRO-CNC  includes a carry case, sensor probe with a  25 foot cable, command reference laminated card, 9Vdc battery. System can be ordered with custom probe cable length.  Additional 10 foot stackable probe cable extensions are also available.

For pricing, custom features and additional information please contact our marketing and applications department at 908-474-9595 or via e-mail: sales@aositilt.com

DUAL AXIS PROBE and CNC FIXTURE

mini_ez-level-pro_cnc_parts_image.jpg

mini_ez-level-procnc_adapter_dwg.jpg

CNC Adapter Drawing.

 

EZ–LEVEL-PRO  INSTRUCTIONS

 

MENU description

 

The selection and change of various display options is performed via an intuitive menu by pressing the four tactile buttons under the display window in an order described below. To activate changes restart the system.

 

The buttons from left to right are:          MENU           DOWN           UP              ENTER

 

The process of making changes via the menu starts by pressing the MENU button.

After the MENU button is pressed, a vertical list of five items appears on the display.

—————————————————————————————————————–

MAX TILT =  Total +- tilt range to be equivalent to a full  left-right and  up-down travel of a bulls eye.

Press MENU button, then use UP/DOWN buttons to stop at MAX TILT

To select MAX TILT, press ENTER button

Use UP/DOWN buttons to select the desired tilt range, Press ENTER button.

Press MENU button.

Use DOWN button to select  SAVE & EXIT, press ENTER

—————————————————————————————————————————————-

ZERO =  This option will make the present orientation of the probe to display ZERO on the display.

Restarting the system will rest the ZERO to its original calibrated value.

Press MENU button, then use UP/DOWN buttons to stop at ZERO

To select ZERO, press ENTER button

Position the probe at desired New Zero orientation, Press ENTER button.

Press MENU button.

Use DOWN button to select  SAVE & EXIT, press ENTER

—————————————————————————————————————————————-

SOUND = Buzzer will sound an audible signal when the bulls eye is in the GREEN null indicating zone.

Press MENU button, then use UP/DOWN buttons to stop at SOUND

To select or cancel SOUND, press ENTER button

Use ENTER button again to select ON or OFF.

Press MENU button.

Use DOWN button to select  SAVE & EXIT, press ENTER

—————————————————————————————————————————————-

ABOUT = Selecting this option shows the current software version.

Press MENU button, then use UP/DOWN buttons to stop at ABOUT

To select ABOUT, press ENTER button

Review version, serial number and date information.

Press MENU button.

Use DOWN button to select  SAVE & EXIT, press ENTER

—————————————————————————————————————————————-

SAVE & EXIT = selecting this option will save the changes and restart the system.

mini_0_0_0_aosi_globe_logo.jpg

200 OK

OK

The server encountered an internal error or misconfiguration and was unable to complete your request.

Please contact the server administrator, [no address given] and inform them of the time the error occurred, and anything you might have done that may have caused the error.

More information about this error may be available in the server error log.