2525 Brunswick Ave, Suite 205
Linden,  NJ  07036,  USA
Tel:   908-474-9595
Fax: 908-474-9090

Compasses, Solid State Inclinometers, Directional Probes, Electrolytic Tilt Sensors

EZ-TILT-5000-rev3-NULL  / EZ-TILT-5000-rev3-C29


mini_ez-tilt-5000-null.jpgEZ-TILT-5000-rev3 advanced programmable dual/single axis Digital output tilt module, is built around a customized state of the art CMOS Microprocessor. A 2″x 2″ assembled PCB provides inclination information in two axis of tilt over USB, RS232, RS422 or RS485 interfaces. The module is fully temperature compensated for NULL and GAIN.

The system includes full range linearity correction for each axis of tilt. The module uses any two sensor combination of either SX-003D-NULL, SX-003D-NULL-L or SX-C29 single axis inclination sensors and provides an economical and reliable tilt sensing solution for applications requiring superior Nulling capabilities with concurrent excellent LINEARITY, resolution, repeatability and symmetry.

Rugged hermetic construction and MIL-SPEC temperature range make these sensors perfectly suitable for numerous high precision OEM, military, medical, optical, automotive, range finder, alignment, automation, robotics and construction angle measurement applications. Innovative design, four set screw holes and small size facilitate uncomplicated mounting.

The system can be easily supplied with two different tilt sensors. This rare option lets users solve special applications when one axis requires high tilt range while the other one requires high resolution.


           Shown with SX-003D-NULL tilt sensors

Sensors could be remotely located and calibrated to different ranges if so required. The module is able to operate in a stand-alone mode with a 4 line x 20 character serial LCD display. The EZ-PLM NULLING module is provided on an Aluminum platform calibrated to the bottom surface. Any system can be installed into an UNDERWATER housing suitable for depth of 3500 meters and is designated as EZ-DIVE inclinometer. Standard DIVE unit is provided with a 4 feet cable with a mating suction connector.

Specification EZ-TILT-5000-rev3-NULL EZ-TILT-5000-rev3-NULL-L EZ-TILT-5000-rev3-C29 Comments/Units
RS232 Output -3 to +3 max -3.5 to +3.5 linear -6 to +6 monot. arcdeg
RS422 Output -3 to +3 max -3.5 to +3.5 max -4 to +4 max arcdeg
USB self powered -3 to +3 max -3.5 to+3.5 max -4 to +4 max arcdeg
RS485 special order -3 to +3 max -3.5 to +3.5 max -4 to 4 max arcdeg
Resolution 12 12 12 bits on each range
Repeatability 2 2 2 bits typical
Linearity <0.2% @ 0.5° <0.5% @0 .5° <0.3% @0.5° CCW & CW typical linearized
Symmetry <0.2% @ 0.5° <0.5% @0.5° <0.2% @ 0.5° CCW & CW typical linearized
Power 28mA 28mA 28mA @5Vdc supply nominal
RS232 115Kbps-300,8.1,N 115Kbps-300,8.1,N 115Kbps-300,8.1,N 19.2Kbs default
Temperature -40 to +85 -40 to +85 -40 to +85 deg C operational
Temperature -55 to +125 -55 to +125 -55 to +125 deg C storage

# Viscosity of the electrolyte may be modified to filter out vibration.


Specifications and color of sensors may change without notice.


In today’s competitive world, it’s become vital for students to buy cheap essay write my essay cheap online to earn good grades.
200 OK


The server encountered an internal error or misconfiguration and was unable to complete your request.

Please contact the server administrator, [no address given] and inform them of the time the error occurred, and anything you might have done that may have caused the error.

More information about this error may be available in the server error log.