SX-070D-LIN, SX-030D-LIN and SX-015D-LIN are single axis LINEAR ceramics based electrolytic tilt sensors provide economical and reliable single axis tilt solutions for applications where very good linearity, high resolution and superior symmetry are required.
Rugged construction and MIL-SPEC wide temperature range make these sensors suitable for numerous military, automotive, industrial, construction, wheel alignment, laser, medical, virtual reality and robotics applications.
Low profile and flat reference surface facilitate simple vertical installation and utilization.
|Range||-80 to +80||-35 to +35||-18 to +18||arcdeg near-linear;|
|Range||-70 to +70||-30 to +30||-15 to +15||arcdeg lin;|
|Linearity||<3% @ 70°||<1% @ 30°||<0.5% @ 15°||CCW & CW|
|Linearity||<2% @ 45°||<0.5% @ 15°||<0.25% @ 7°||CCW & CW|
|Linearity||<1% @ 30°||<0.25% @ 7°||<0.2% @ 5°||CCW & CW|
|Symmetry||<3% @ 70°||<2% @ 30°||<2% @ 15°||CCW & CW|
|Response time||<40 msec||<40||<40||msec * #|
|Time constant||<150 msec||<150 msec||<150 msec||msec ** #|
|Tot. settling time||<300 msec||<300 msec||<300 msec||msec *** #|
|Temperature||-55 to +125||-55 to +125||-55 to +125||deg C operational|
|Temperature||-55 to +125||-55 to +125||-55 to +125||deg C storage|
|Size||0.750″w x 0.850h x 0.200||0.750″w x 0.850h x 0.200||0.750″w x 0.850h x 0.200|
* Elapsed time until the sensor reacts to a tilt disturbance.
** Elapsed time from the end of disturbance until the sensor is within 90% of its final output.
*** Elapsed time from the end of disturbance until the sensor is at STEADY STATE output.
# Based on standard non-modified electrolyte.
# Viscosity of the electrolyte may be modified to filter out vibration.
ALL DATA OBTAINED WITH EZ-TILT-3000 ANGLE CONVERSION MODULE
Specifications and color of sensors may change without notice.